download
INSTALLATION PROCEDURES: Pg 1 222-05X Figure 1 PARTS LIST: 2 ea Footman Loops 4 ea #8 x 1//2 Sheet Metal Screws 3 ea Sheet Metal Screw Studs STEP 1. You will need a slot and channel for installation of this roll bar top. If so equipped disregard this step. If not equipped you will need to order part #222-9340 for snap style tops or part #222-9440 for Fast Trac style tops. Place slot on top of windshield frame next to vertical flange and centered from side to side. Mark and drill 1/8″ holes using slot as a guide. Secure to windshield frame with #10 x 1/2″ sheet metal screws through slot, washers and into windshield frame. See figure 1. CARE INSTRUCTIONS Convertible tops require special care if you want to get the maximum usage and enjoyment from them. The following recommendations, if followed carefully, can extend the life of your top. 1. Hand wash using a mild non-detergent soap such as Ivory. Use a nonabrasive cloth or sponge. Rinse thoroughly. 2. DO NOT wash in direct sunlight and avoid automatic car washes. 3. When your top is clean, we recommend using “303 Protectant” on both the vinyl top and windows. This product contains a sunscreen that helps protect from the sun’s damaging rays. 4. When top is not in use place in storage bag provided. Pg 2 222-05X Figure 2 Figure 3 STEP 2. Slide sewn in rope in roll bar top, into channel with the vinyl side down. Place channel into gap between slot and windshield frame. Flip top over roll bar. See figure 2. STEP 3. Place footman loop at rear corners of vehicle. Using footman loop as a template mark and drill 1/8″ holes. Secure to body with #8 x 1/2″ sheet metal screws. Thread sewn in buckle straps through footman loops and tighten. See figure 3 STEP 4. Pull forward and down on straps at front corners of top. Mark hole locations for sheet metal screw studs on windshield frame using snaps on vinyl top as a guide. Drill 1/8″ holes. Install sheet metal screw studs and snap top to studs. See figure 2. WARRANTY INFORMATION: Specialty Top Co. manufacturing warrants to the original purchaser of any product it manufactures, that the product will be free of defects in material or workmanship for a period of 90 days from date of purchase. Such obligations under this warranty shall be limited to the repair or replacement , at Specialty’s discretion, of any assembly or parts which upon examination by Specialty Top Co. proves to be defective. All defective items must be returned with proof of purchase to Specialty Top Co. Manufacturing, 200 East 64th Avenue, Denver, Colorado 80221, freight prepaid. This warranty does not cover damage resulting from abuse, misuse, alteration, accident or damage in transit. Specialty’s obligations under this warranty are limited to the aforementioned repair or replacement of warranty defects for which the return authorization has been received during the warranty period, and SPECIALTY TOP CO. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM BREECH OF THIS OR ANY IMPLIED WARRANTY
